Monthly Service Plan

Furnaces & Air Conditioners

$20/Month for Initial Appliance

$10/Month for Each Additional

Includes:

  • Emergency Repairs 
  • Annual Scheduled Inspection & Tune Up
  • Air filter replacement (additional cost per filter)

Inspection Checklist:

Heating

  • Test for Carbon Monoxide (PPM)
  • Check CO Detector Batteries
  • Test for Natural Gas Leaks
  • Test Door Safety Switch
  • Test Pressure Switches
  • Check Heat Anticipator
  • Check Manifold Pressure (IWC)
  • Check Fan Controls
  • Inspect Furnace Filter
  • Inspect Unit Wiring
  • Inspect Ignition System
  • Inspect Burner for Corrosion
  • Check Pilot
  • Check Fan Belt Tension
  • Lubricate Blower Motor
  • Visually Inspect Blower
  • Check Blower Motor For Noise
  • Check Combustion Motor For Noise
  • Calibrate Thermostat
  • Check Humidity (RH%)
  • Inspect Humidifier Vapor Pad
  • Check Burners
  • Check Burner Limits: Rollout
  • Check Burner Limits:High (°F)
  • Check Ignitor (0hms)
  • Check Flue for Gaps/Dents/Rust
  • Check Flue for Backdraft
  • Check Visual Ducts for Leaks/Holes
  • Visual Heat Exchanger for Cracks
  • Check Pressure Switch Hosing
  • Inspect Area Around Furnace
  • Check Batteries on Thermostat
  • Check Fresh Air Hood
  • Visually Check Fireplace for Fan Kits
  • Inspect HRV Filters
  • Inspect Hot Water Tank for Leaks
  • Inspect Hot Water Tank Burner
  • Check Flame Sensor (DC)
  • Inspect Floor Drain

Cooling

  • Record Superheat/Subcool (°F)
  • Inspect Condensor Coil
  • Inspect AC Wiring/Connectors
  • Check Voltage & Amperage on Motors
  • Check Compressor Contractor & Cooling Fan
  • Visually Inspect Compressor/Check Amp Draw
  • Check Start Capacitor
  • Check Disconnect
  • Check Operating Pressures
  • Check Coil Temperatures
  • Outside Temp
  • Inside Temp
  • Suction Pressure
  • Head Pressure
  • Evap Saturation Temp
  • Liquid Line Temp
  • Return Air Temp
  • Supply Air Temp
  • Coil Size (tons)
  • Condenser Size (tons)